Izdelki za oprema za embalažo (176)

Gas hand tool for thermo shrinking Hornet, high power (until 90 Kw), but very light and handy with practical handle with fast lever gas and electronic ignition. The high power and ease of use allow a fast shrinking of plastic films of each thickness and the realization of packaging even large. Raptor it's available with power of 70 Kw and 90 Kw. The main areas of application are: Packing : Welding / retraction of packaging also large Boating : Realisation of coverages in plastic film for boat storage Building : Welding and retraction of plastic film for protective scaffolding Environment : Welding of plastic film for coating for containment tanks Example model:FP HORNET 70 Power :70 Kw. - 238.800 btu/h Supply :propane gas Max. pressure :4 bar Consumption :5,22 Kg/h Ignition :piezoelectric

Pneumatic tensioner model FP LASH very powerful and easy to handle, suitable for all working conditions, guarantees a high tensile strength and it is suitable for securing bulky and heavy loads on trucks, containers, ships, etc. The high tension force (7500 N) allows the use of textile strap with width up to 50 mm. It is also possible to adjust the tension acting on the supply pressure. The holding capacity of strap depends on material type and on strap of choice. Strap width:Max 50 mm Tension:Max 7500N Weight:4,5 Kg

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the most widely used single-piece unit series. The tank can be made, at choice, in treated and painted carbon steel or in AISI 304 stainless steel. The cover, in both cases, is manufactured in fibreglass-reinforced polyester. It is noteworthy for the ease of installation (limited civil engineering works, factory-assembled unit). Typical applications: hotel villages small communities various types of industry -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Pneumatic tensioner model FP CORD for tensioning and cutting of polyester strap textile and composite. Equipped with high tension force (7500 N) allows the use of strap widths up to 32 mm. By acting on the supply pressure it is possible to adjust the tension. The built-in knife allows cutting the strap easily and without waste of material. The holding capacity of strap depends on material type to strap and on strap choice. Strap width:Max 32 mm Tension:Max 7500N Weight:3,8 Kg

PNEUMATIC CLIPPER FOR GABIONS Large sturdy pneumatic clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm (mm. 13 for model FPPS45P-13). Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections. Structure :Steel with rubber handle Charger capacity:100 rings Open ring width (outer):mm 45 Open ring height:mm 24 Opening width:mm 25 Working pressure:5-6 bar Closure internal diameter:mm 15 (mm 13 for model FPPS45P-13)

Una combinazione delicata, per far pendere la bilancia tra aromi e robustezza, dal lato dei primi. Senza perdere la tipica pienezza dell’espresso italiano. Il Blend Soave si caratterizza per le sue note floreali e cioccolatose che evocano un retrogusto profondo di tabacco e incenso.

Fardellatrice automatica monoblocco con alimentazione tramite nastro frontale, composta da saldatrice e tunnel di termoretrazione assemblati su singola struttura in carpenteria metallica verniciata con polvere epossidica. Possono essere direttamente collegate alle linee di produzione e permettono l'esecuzione di pacchi di diverse forme e misure da confeziomare in relazione alle caratteristiche di produzione. I nostri tunnel a corredo delle fardellatrici offrono elevata efficienza di termoretrazione dei films, unita ad un ridotto consumo energetico.

PNEUMATIC CLIPPING MACHINE WITH RING LOCK HR24TC PN Pneumatic clipper with ring closure for the assembly of mesh cages, springs for mattresses, fences and packaging. Light and handy. It uses clips type HR24 with width mm 24, height mm 12 and wire diameter mm 1,8 Magazine capacity:120 rings Usage pressure:5,5-7,6 bar Closure diameter:mm 4,8-8,7 Ring type used:HR24ZA-HR24 INOX

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. M115 is the smallest single-piece unit series. It involves a set of rotating discs complete with tank and cover, both manufactured from fibreglass-reinforced polyester. It is an economical version, easy to install. Typical applications: apartment blocks villas small campsites factory premises -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Multifunction counter and floor scales. Capacity from 6 to 600 Kg - Division 2 to 200 grams. MODULAR SCALES FOR COUNTER AND FLOOR "WALL-E" Counter or floor scales complete of multifunction weight indicator FPDFWL BASE 6-digit standard. They have a strong and solid structure and a load of stainless steel. Extremely easy to use and versatile, guaranteeing precision and reliability. They are particularly suitable for the industry and commerce. Available also CE-M APPROVED for sale to third parties, according to OIML R-76/EN 45501. TECHNICAL FEATURES WEIGHING PLATFORM Precise and sturdy structure, suitable for creating scales and automatic weight checking systems for all industrial and commercial applications. Stainless steel top. Standard version works with aluminum cell 3000d with IP65 protection. Example model:FPWET15 Dimensions :mm. 300x300x130 Load max. :Kg. 15 Standard division :gr. 5 Division CE-M:gr. 5

New lightweight and handy device with practical handle with additional controls for rapid gas and electronic ignition opening. The high power and ease of use of this device allows fast retraction of thermo plastic films of any thickness and the packaging of large products. FEATURES - Structure with double insulation for continuous use without overheating and without risk of burns; - Terminal with 360° rotation for use in any position; - 8 meter pipe with quick release; - Safety valve included (in case of breakage block the gas); - Practical carrying case; - Noise level 83db. Example model:RAFALE 65 Max power (kW):37-66 Supply:Propane Gas pression (bar):1.5-3.5 Gas consumption (Kg/h) :2.6–4.8 Ignition:Electronic

La saldatrice angolare a campana è ideale per confezionare prodotti di piccole e medie dimensioni con film poliolefina e pvc. L'operatore abbassa manualmente la barra saldante completa di campana in modo che la saldatura e la termoretrazione avvengano in un unica operazione. Questo garantisce un ottimo risultato, semplice ed economico con un ridotto consumo energetico. Il rilascio della campana avviene in modo automatico.

The flow of oil and water is introduced to the tank and distributed in a homogeneous way across the whole cross-section. They are composed of a containment tank which can be manufacturedfrom treated and painted carbon steel or AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized agains UV radiation. Special materials and executions are available on request. Typical applications: first fall rain water, petrochemical plants, mechanical workshops, refineries and depots of hydrocarbons, washing of vehicles, land reclaim, refuse handling centres. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

Clipping machines HR20/23 with ring closure for the assembly of wire mesh, springs for mattresses, fencing and packaging. Aluminium body, rubber grip and return of pneumatic gripper (without spring). The closure diameter of the of the ring depends on the type of material to be clipped. The clipping machine HR 20 and HR 23 are suitable for example for fences and to close bags and nets. The sealing of the clipping depends essentially on the type of material that is going to seal. On soft materials, such as on a net bag, the clip remains locked. On stiffer materials or on fences, the clip guarantees tightness but may not prevent the wire from sliding. Example model:HR 20 Storage capacity:200 rings Width open loop (external):mm 19,3 Closing diameter:from 4,8 to 6,8 mm Type of ring used:HR 20 with wire diameter 1,50 mm Working pressure:6 bar

The manual table clipper FP HR PS II is a small, handy and versatile table clipper with lever operating. It’s ideal for closing bags and net sacks where the number of packaging is not very high and therefore does not justify the purchase of a pneumatic machine. All parties have an anti-rust treatment and are easy to clean. Use aluminum clips diameter 2 mm, internal width 6 mm and length 13 mm, bars of 50 pcs. The clipper FP HR PS II is also used to close bags of mozzarella or other products containing liquid as it makes an airtight seal. Storage capacity:N° 150 clips Packaging max. diameter:mm 6 Clipper dimensions:mm 415 x 162 x 765H

Un Decaffeinato che non perde la tipica corposità e intensità del caffè? Provalo, se non ci credi. Il gusto della tradizione con una percentuale di caffè non superiore allo 0.1 % La caffeina è estratta dal chicco ancora verde e non tostato senza l’utilizzo di solventi nocivi. Tutto il gusto morbido e vellutato del caffè, senza caffeina. Con note di caramello, cioccolato al latte e frutta secca.

The most common manual strapping tool for plastic straps. Practical and economical, it is particularly suitable for polypropylene strap with width 12 mm and thickness max mm. 0.8. The closure is done with a metallic tooled seal to increase tightness. Upon request, you can use it in fruit and vegetable sector equipping it with a hook for boxes and containers (optional). MODEL:PL 13 Usable strap:polypropylene Closure type:metal seal PL13 Max width usable strap:mm. 12 Max thickness usable strap:max mm. 0,8 Strapping tool weight:Kg. 2,9

MANUAL CLIPPER FP HR 45M FOR GABIONS Large sturdy manual clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm. Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections. Structure:Steel with rubber handle Charger capacity:40 rings Open ring width (outer):mm 45 Open ring height:mm 24 Opening width:mm 25 Closure diameter:mm 15

BATTERY CLIPPING MACHINES WITH RING LOCK - HR24TP BT Battery-operated clippers with ring closure, for the assembly of mesh cages, springs for mattresses, car seats, fences and packaging. The clippers work with an 18V 2Ah battery, however it is possible to purchase the 18V 3Ah battery with greater autonomy as an option. Battery models can be easily transported from one work area to another without space limitations or used outdoors. They use clips type HR24 with width mm 24, height mm 12 and wire diameter mm 1,8 Example model:HR24TP8-11 BT Magazine capacity:120 rings Closure diameter:mm 7,9-10,7 Rounds per charge:1600-1800 Autonomy:approx. 60 min Ring type used:HR24ZA-HR24 INOX

Aroma forte e deciso, dalle gradevoli note tostate con retrogusto vivace e durevole. L’Espresso Italiano nella sua forma più intensa. Senza compromessi.

Professional manual tackers Rocama 10/20 with body made of aluminum alloy. Loading dock below. Ideal for fixing labels on packaging and protective materials in wood, for assembly of frames and frames for decoration work, to set wallpaper, baseboards and wood profiles, for exhibitions stands, furniture stores, interiors of homes, caravans, campers and coatings of sofas and furniture. Equipped with power regulator. Available in two models: Rocama 10 for staples series AP with length of 5-8-10 mm, with total width 10 mm, section 0,45x0,90 mm. Rocama 20 for staples series AP with length of 10-12-14-16-20 mm, with total width 10 mm, section 0,45x0,90 mm, brads series FAST M of 20 mm and pin series FAST W of 20 mm, section 1,00x1,25. Example model:Rocama 20 Charger capacity:100 staples Staples lenght:from 10 to 20 mm Staples:AP 110-112-114-116-120 Pins:FAST M 20 with head – FAST W 20 without head

Clipping machine FS CL 11-20 with ring closure for the assembly of wire mesh, springs for mattresses, fencing and packaging. Aluminium body, rubber grip, return of pneumatic gripper (without spring). Storage capacity:200 rings Working pressure:6 bar Width open loop (external):mm 19,3 Closing diameter:from 4,8 to 6,8 mm Type of ring used:FS 20 Z with wire diameter 1,50 mm

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the latest entry to the single-piece unit series. The tank is made from treated and painted carbon steel, the cover in fibreglass-reinforced polyester. It associates the advantages of a single-piece unit (simplicity of installation, limited civil engineering works) with the possibility of application in installations already of a considerable size. The transport of these single-piece units is of the special category, but still at acceptable costs (it does not need a police escort). Typical applications: small to medium-sized communities various types of industry -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

HORIZONTAL DOUBLE CUTTERS BD 122 - BD 220 Universal cutters for cutting paper, corrugated cardboard, reinforced papers and polythene, polyethylene foil, polyethylene bubble, polyethylene foam. This series is very useful because you can use at the same time two different materials. The use of the cutter is extremely simple: it is necessary to carry the material to the desired length and manually operate the blade holding carriage, the cut is clean and precise in both directions. All the cutters are mounted on a frame complete with coil holder and rubber feet, on request may have the wheels with brake. For reasons of space the product is shipped disassembled. The cutter can be equipped with: RHOMBOIDAL BLADES: suitable for cutting plastic film, polyethylene foil, bubble wrap or foam. CIRCULAR BLADES: suitable for cutting paper, corrugated paper and reinforced. Example model:BD 122 Max. cutting width.:cm. 100 Type of blade:Rhomboidal (standard) for the cutting of plastic film Capacity:Kg 50 Max. reel diameter:cm. 100

This envelope is used in the packaging sector because it allows the item to be enveloped both in the upper part and at the bottom. The welding can take place in the upper part both in the horizontal and inclined position. Moreover, the machine may also be sold separately should the customer use pre-cut envelopes and thus should only the bottom of the envelope be sealed. Finally, with our envelope machine welding is environmentally safe without any production of fumes. FEEDING:230 V ABSORPTION:0,332 Kw SIZE:810x300x2000 WEIGHT:Kg 91 WORKING PRESSURE:Atm 6

High speed with PLC and Touch screen control panel The new FPWK 0430-TOUCH model represents a remarkable evolution compared to the previous models because it can use polypropylene band with a thickness from 60 my to 150 my and polythene paper band with a thickness from 100 to 130 my. The maximum speed is 30 cycles/min. The machine is equipped with a Schneider Touch screen control panel (simple and intuitive) with which all the functions of the machine can be easily checked with the exception of the tensioning which is adjustable via a separate potentiometer. The standard bench model uses 150 m spools. but the machine can be installed on a motorized reel holder for rolls of 500-1500 m. The FPWK 0430 banding machine in addition to the classic use in graphic arts, bookbinding, paper converting, is particularly suitable for the realization of multiple packs or for the combination of multiple products in promotional sales. Usable material:rolls of paper or polypropylene Usable tape width:mm 29 Max. speed:30 cycles/min Band tension:5~40 N Arc size:mm 430 x 210H Max pack weight to be tied:kg 10